High Performance, High Density, Low latency, 100-Gigabit Omni-Path Architecture, Meets the Most Demanding Application for HPC

Specifications

Port Attributes:
    - 48x 100 Gb/s ports - QSFP28
    - Optional RJ45 1G management port
    - Optional USB serial console port

Switching:
    - Switching capacity 9.6 Tb/s total fabric bandwidth
    - Optimized high message rate
    - Optimized error detection/correction and low latency
    - Capability of 27,648 nodes in 2-tier configuration
    - Virtual lanes: Configurable from one to eight VLs plus one management VL
    - Configurable MTU size of 2 KB, 4 KB, 8 KB, or 10KB
    - Maximum multicast table size: 8192 entries
    - Maximum unicast table size: 49151 entries
    - Passive copper or active fiber cables

Management:
    - Out-of-band management card (SSH-C48QM only)
    - Built-in Fabric Manager
    - Subnet Management Agent (SMA)
    - Performance Management Agent (PMA)
    - Enables Command Line Interface and Chassis Management GUI through 10/100/1000 Base-T Ethernet
    - Enables Serial Console through USB Serial Port
    - Supports Embedded Subnet Manager (ESM) and Performance Manager (PM)
    - Enables Network Time Protocol (NTP), SNMP/MIBs, and LDAP
    - FastFabric Toolset
    - Fabric Management GUI

Dimensions:
    - 17.2" W x 16.6" D x 1.72" H

Weight:
    - 16 lbs / 7.26 kg

Power:
    - Redundant hot-pluggable 750W Platinum Level power supplies
    - AC Input: 100-127V/200-240 V, 50-60 Hz
    - Power consumption:
        210 W (Copper)
        380 W (All max 3W Optical)

Air Flow:
    - Foward direction

Operating Temperature:
    - 0°C to 40°C (32°F to 104°F)